HIGHLIGHTS
Third year
1) Nonclassical correlations between single photons and phonons from a mechanical oscillator UNIVIE operated an optomechanical crystal structure (mechanical resonance frequency ω_{m}/2π = 5.3 GHz, mechanical quality factor Q_{m} = 1.1 × 10^{6}, cavity decay rate κ/2π = 1.3 GHz, singlephoton coupling strength g_{0}/2π = 825 kHz) in a dilution refrigerator. The mechanical oscillator was first initialized in its mechanical ground state by cryogenic cooling. The resulting mechanical occupation number was evaluated by sideband thermometry, yielding a value of n_{m}=0.025, showing that the mechanical oscillator was deep in the quantum ground state. In a second step, a short light pulse bluedetuned with respect to the cavity resonance (the “write pulse”) was used to create a photon—phonon pair with a probability of approximately 3%. In a third step, a reddetuned light pulse (the “read pulse”) was used to drive a phonontophoton conversion, effectively swapping the quantum state from the mechanical oscillator onto the light field. To demonstrate that this protocol can be operated in a fully quantumcoherent manner, the output light from both pulses has been used to measure the crosscorrelation function g^{(2)}. The observed violation of a Cauchy–Schwarz inequality obeyed by g^{(2)} for classical light, is clear evidence for the nonclassical nature of the mechanical state generated. Our results demonstrate the availability of onchip solidstate mechanical resonators as light–matter quantum interfaces. The performance we achieved will enable studies of macroscopic quantum phenomena as well as applications in quantum communication, as quantum memories, and as quantum transducers. 

2) A dissipative quantum reservoir for microwave light using a mechanical oscillator Isolation of a system from its environment is often desirable, but dissipation can also be a useful resource. In the field of cavity electro and optomechanics, the control over mechanical oscillators down to the quantum regime is achieved by engineering the coupling with the inherently cold, dissipative nature of the electromagnetic degree of freedom. Breaking from this paradigm, recent theoretical work has considered the opposite regime in which the dissipation of the mechanical oscillator dominates and provides a cold, dissipative reservoir to an electromagnetic mode. EPFL has implemented this reversed dissipation regime in a microwave cavity optomechanical system and realized a quasiinstantaneous, cold reservoir for microwave light. Coupling to this reservoir enables to manipulate the susceptibility of the microwave cavity, corresponding to dynamical backaction control of the microwave field. Additionally, we observe the onset of parametric instability, i.e. the stimulated emission of microwaves (masing). Equally important, the reservoir can function as a useful quantum resource. We evidence this by employing the engineered cold reservoir to implement a large gain (above 40 dB) phase preserving microwave amplifier that operates 0.87 quanta above the limit of added noise imposed by quantum mechanics. Such a dissipative cold reservoir forms the basis of microwave entanglement schemes, the study of dissipative quantum phase transitions, amplifiers with unlimited gainbandwidth product and nonreciprocal devices, thereby extending the available toolbox of quantumlimited microwave manipulation techniques. 

3) Multimode optomechanical system in the quantum regime UCPH has realized a simple and robust optomechanical system with a multitude of longlived (Q > 10^{7}) mechanical modes in a phononicbandgap shielded membrane resonator. An optical mode of a compact Fabry–Perot resonator detects these modes’ motion with a measurement rate (96 kHz) that exceeds the mechanical decoherence rates already at moderate cryogenic temperatures (10 K). Reaching this quantum regime entails, inter alia, quantum measurement backaction exceeding thermal forces and thus strong optomechanical quantum correlations. In particular, we observe ponderomotive squeezing of the output light mediated by a multitude of mechanical resonator modes, with quantum noise suppression up to −2.4 dB (−3.6 dB if corrected for detection losses) and bandwidths ≲90 kHz. The multimode nature of the membrane and Fabry–Perot resonators will allow multimode entanglement involving electromagnetic, mechanical, and spin degrees of freedom. 
Second year
1) Optimal state estimation and detection of optomechanical correlations UNIVIE and LUH have implemented a Kalman filter, which is a wellknown technique from classical estimation theory, based on an accurate model of the experimental setup (in our case including coloured amplitude and phase noise of the laser, photon losses, and multiple auxiliary mechanical modes). It produces the leastsquareerror estimates of the optical and mechanical dynamical variables. In the experiment we monitored the real time trajectories, and consequently also the correlations between the optical phase quadrature and the mechanical position, created by driving the optomechanical system with a reddetuned laser drive. Increasing the optomechanical coupling strength from the weak to the strong coupling regime results in the creation of strong optomechanical correlations. In order to verify the accuracy of the used model, we conducted an extensive statistical analysis of the innovation sequence, i.e., the difference between predicted and actual measurements. 

2) Demonstration of singlephoton cavity optomechanics mediated by a quantum twolevel system AALTO node has designed and demonstrated an optomechanical setup in the microwave frequency regime involving a Josephson junction qubit. In particular we demonstrate boosting of the radiation–pressure interaction by six orders of magnitude, allowing to approach the strong coupling regime. We observe nonlinear phenomena at singlephoton energies, such as an enhanced damping attributed to the qubit. This work opens up nonlinear cavity optomechanics as a plausible tool for the study of quantum properties of motion. 

Quantum illumination consists in the detection of a distant target in the regime of large noise and very weak signals. In fact, it is known that entangled light can outperform the optimal classical target detection strategy based on sending coherent signals. UNICAM node has developed a realistic scheme in the microwave domain which is the natural scenario for large noise – weak signal regime. The key element is just a mechanical resonator interface, simultaneously coupled to driven optical and microwave modes, which must be used twice: i) for generating hybrid opticalmicrowave two mode squeezed radiation as the necessary probing light; ii) for highfidelity upconversion of the weak return microwave signal into an optical signal which can be then measured with a photodetector, realizing a phaseconjugated receiver. See also Physics coverage article 
First year
1) Optical detection of radio waves through a nanomechanical transducer Very important result by the UCPH node, which has been published in Nature. The radiofrequency signals are detected as an optical phase shift with quantumlimited sensitivity. This performance competes with current stateoftheart operational amplifiers at room temperature and it can be improved with further advances. The device will be of interest in sensing applications (NMR, radio astronomy etc.) where it is coupled to a cold signal input and the Johnson noise is strongly suppressed. Compared to existing detectors, this approach has the advantage of working at room temperature, and the signals produced can be readily transferred into standard optical fibres (see also the News&Views comment by the AALTO partner) See also Physics World and Scientific American coverage articles 

2) Graphene optomechanics and sideband cooling at microwave frequencies The first experimental demonstration of a graphenebased electromechanical resonator, by the AALTO node, in which a graphene flake is capacitively coupled to a microwave cavity. Such a coupling has been used for sideband cooling the mechanical motion down to n = 40 thermal quanta, which is the lower phonon occupation recorded to date with graphene resonators. 

3) Quantum limited microwave amplification in the reversed dissipation regime Proposal for quantumlimited amplification and parametric instability in the reversed dissipation regime of cavity optomechanics, in which a damped mechanical oscillator can be used to cool or amplify a microwave cavity; such a study opens a practical way to achieve a quantumlimited optomechanical amplifier with a large gainbandwidth product complementing phasesensitive amplifiers based on superconducting Josephson junctions. 

4) HighQ InGaP membranes for strong coupling optomechanics Design and fabrication of novel InGaP nanomembranes, which are particularly suited for the integration in optoelectromechanical systems, and which have shown very high mechanical quality factors. 